Flooring that Reflects Passion !

PDFPrintE-mail

Solid color data sheet

solidcolorAvailable Color

PRODUCT DESCRIPTION:

Solid color floor systems are designed to meet a variety of applications and provide a durable chemical resistant surface.
They can be formulated to meet many different environment applications from containment to service bays.

Applications
Commercial space, retail floors, office building, restaurants, automotive service areas, car wash facility, garages, aircraft hangar, Walkways, manufacturing, warehouse space, fab shops, laboratories , chemical exposure areas.

COLORS:
Unlimited, can be formulated to match any color

FILM THICKNESS:
10-20 mils (Higher builds per specification and condition)

FINISH CHARACTERISTICS:
Gloss finish

FLEXURAL STRENGTH:
No cracks on 1/8” mandrel

COMPRESSIVE STRENGTH:
7,400 psi @ ASTM D695

TENSILE STRENGTH:
4,400 psi @ ASTM D638

ADHESION:
360 psi @ elcometer (concrete failure, no delamination)

ULTIMATE ELONGATION:
7.4%

HARDNESS:
Shore D = 82

ABRASION RESISTANCE:
Taber abraser CS-17 calibrase wheel with 1000 gram total load
and 500 cycles= 15-20 mg loss

VISCOSITY:
Varies per process

CURE SCHEDULE: (70°F)
tack free (dry to touch) …………..4-8 hours
recoat or topcoat.....……………..2-4 hours
light foot traffic...………………...12 hours
full cure (heavy traffic)... …….......1-2 days

CHEMICAL RESISTANCE:
REAGENT RATING
xylene C
methanol D
ethyl alcohol C
skydrol C
50% sodium hydroxide E
10% sulfuric acid D
MEK C
10% HC1 (aq) C
5% acetic acid C
Rating key: A - not recommended, B - 2 hour term splash spill, C - 8 hour term splash spill, D - 72 hour immersion, E - long term immersion. NOTE: extensive chemical resistance information is available through your sales representative.

PRIMER:
Tinted epoxy primer to provide superior adhesion

TOPCOAT:
Polyaspartic urethane resin or specified per project requirements